高反射率p-GaN欧姆接触电极

根据光学薄膜原理计算了GaN/Ti/Ag、GaN/Al和GaN/Ni/Au/Ti/Ag、GaN/Ni/Au/Al多层电极结构的反射率,得出Ag基和Al基反射电极均能在全角范围内提供较高的反射率。实验测量结果表明,反射率能高于80%的Ag基反射电极,具有低欧姆接触的电学特性。并将GaN/Ni/Au/Ti/Ag多层反射电极应用在上下电极结构的GaN基LED中。实验上采用两步合金法获得了低接触电阻、高反射率的电极结构,并引入Ni/Au覆盖层克服了Ag高温时的团聚和氧化现象。解决了Ag电极的稳定性问题,显著地提高了LED的出光效率,成功制备了具有上下电极结构的GaN基LED管芯。     

一维接触过程的光滑性与稳定性

本文证明了一维接触过程在适当的小扰动下，其极点平稳分布除在临界点λ＿ｃ处外总是光滑的．特别，一维接触过程本身的极点平稳分布关于其参数除在临界点处外总是光滑的．     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Atom transfer radical polymerization directly from poly(vinylidene fluoride): Surface and antifouling properties

The direct preparation of grafting polymer brushes from commercial poly (vinylidene fluoride) (PVDF) films with surface‐initiated atom transfer radical polymerization (ATRP) is demonstrated. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the hydrophilic monomers from the PVDF surface. Homopolymer brushes of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and poly (ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the PVDF surface. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and atomic force microscopy. A kinetic study revealed a linear increase in the graft concentration of poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[poly(ethylene glycol) monomethacrylate] (PPEGMA) with the reaction time, indicating that the chain growth from the surface was consistent with a controlled or living process. The living chain ends were used as macroinitiators for the synthesis of diblock copolymer brushes. The water contact angles on PVDF films were reduced by the surface grafting of DMAEMA and PEGMA. Protein adsorption experiments revealed a substantial antifouling property of PPEGMA‐grafted PVDF films and PDMAEMA‐grafted PVDF films in comparison with the pristine PVDF surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3434–3443, 2006     

Modelling of composting of food waste in a column reactor

The composting of organic solid waste, the mixture of fruit and vegetable leftovers enriched with night soil, was investigated in a closed thermally insulated reactor. It was found that 80.9 % of the original substrate biodegraded after 14 days. A mathematical model of the column reactor was proposed where the biodegradation rate of the organic solid waste was described using simple n-thorder kinetics. A good prediction of process performance was obtained using the proposed kinetics and experimentally obtained reaction heat. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

CTBN-TOUGHENED EPOXY RESINS——EFFECT OF CURING MECHANISM ON NETWORK STRUCTURE OF THE RUBBER PHASE

Epoxy resins toughened with carboxyl-terminated butadieneacrylonitrile copolymers (CTBN) are two-phase thermosets. The network of the in situ formed rubber particles depends upon the curing mechanism of the resin. When a primary polyamine such as triethylene tetramine was used as curing agent, the network of the rubber phase was quite incomplete, whereas a perfect rubber network was formed with 2-ethyl-4-methyl imidazole as the curing agent.     

甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

NBR/ORGANOMODIFIED BENTONITE INTERCALATED HYBRIDS AND THEIR EFFECTS ON THE TOUGHNESS OF PVC

Hybrids of intercalative nitrile-butadiene rubber/organomodified bentonite (NBR/OMB) were prepared by thelatex intercalation technique. Investigation of their mechanical properties and the microstructore of NBR/OMB showed thatthe organomodified bentonite is an effective toughener for NBR. Transmission electronic microscopy (TEM) and X-rnydiffraction (XRD) tests showed that the NBR macromolecule could be intercalated into the galleries of bentonite.Incorporation of NBR/OMB hybrids as tougheners into poly(vinyl chloride) (PVC) results in a substantial increase in theimpact strength of PVC, but little decrease in its tensile strength and flexural strength, compared to the unmodified PVC.     

联机卡尔曼滤波光度法同时测定混合体系中5种合成食用色素

我国法定可使用的合成食用色素主要有5种。即苋菜红、胭脂红、柠檬黄、日落黄和亮蓝。根据调色需要,它们常被混合配置应用.目前一般采用高效液相色谱和层析分离法分析,但尚缺少可靠的同时测定此5组分的化学计量学方法,Loosbroek曾用卡尔曼滤波光度法鉴     

Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.